Slow Pitch Jigging: Technique, Jigs and Rhythm
Slow pitch jigging explained step by step: the half-turn and full-turn pitch, jig shapes, fall action and the best fish to target.
Slow pitch jigging is a Japanese jigging technique that uses short, rhythmic lifts of a parabolic rod to make a jig flutter and fall naturally. Unlike high-speed jigging, the main bite comes on the fall, when the jig glides and spins like a dying baitfish. It is deadly for grouper, snapper, amberjack, trevally and many deep reef fish, and it is much less tiring than speed jigging.
How slow pitch jigging differs from speed jigging
- Speed jigging: fast, hard rod strokes with long, thin jigs. Tiring, aimed at fast pelagic fish.
- Slow pitch: gentle lifts using the rod's spring, short rounded jigs, and long glides on the fall. Aimed at bottom and mid-water reef fish.
Tackle for slow pitch jigging
Rod
A dedicated slow pitch rod is short (1.8 to 2.1 m), with a soft, parabolic action and a strong backbone. It is rated by jig weight, for example "max jig 250 g". The rod's spring does most of the work. See the jigging rod guide.
Reel
Most anglers use a small conventional reel with a high gear ratio and a smooth drag. A conventional lets you control the drop and fish directly over the jig. See best reel for jigging.
Line and leader
- Braid: PE 1.5 to 3.
- Leader: 30 to 60 lb fluorocarbon, 3 to 6 m. Join with an FG knot.
Jigs and hooks
- Slow pitch jigs are short and leaf shaped, with the weight towards one end. Centre-weighted jigs glide flat; end-weighted jigs fall faster.
- Assist hooks at the top, and sometimes the bottom. See assist hooks for jigging.
Choosing jig weight
A common rule is 1 g of jig per metre of depth in light current. Increase in strong current or with thicker line. The jig must reach the bottom and stay close to vertical.
The basic slow pitch actions
- One pitch, one crank: lift the rod sharply about 20 to 30 cm while turning the reel handle a quarter or half turn. Then lower the rod tip and let the jig fall on a tight line.
- Long pitch: a full turn of the handle with a bigger lift, for a longer flutter.
- Slow lift and drop: lift the rod slowly, then drop it fast so the jig falls freely and spins.
- Pause: stop for a few seconds, letting the jig sink back down.
Mix these, and watch your line on the fall: a bite often shows as the line stopping or going slack.
Where to fish
- Reefs, wrecks and pinnacles in 30 to 200 m.
- Over bait marks on a fish finder. See how to use a fish finder.
- Work the bottom 10 to 20 m of the water column for grouper and snapper.
Target species
Grouper, snapper, amberjack, trevally, emperor, cobia and many deep reef species.
Setting the hook and fighting
Assist hooks often hook fish on their own. When you feel weight, wind down tight and lift steadily. Use the rod's bend to absorb lunges, and get bottom fish away from the reef quickly.
If you are not getting bites, change the rhythm before you change the jig. Often the fish want a longer pause or a faster fall, not a different colour.
Identify your catch with ReelScan: snap one photo to get the species, size and safety notes, and earn points. Scan a fish.
Summary
Slow pitch jigging uses short lifts and long glides to trigger bites on the fall. Pair a parabolic rod with a small conventional reel, thin braid and a fluorocarbon leader, choose jig weight for depth and current, and vary your rhythm until the fish respond.