Vertical Jigging Guide: Speed Jigging and Slow Pitch Explained
Learn vertical jigging: speed jigging vs slow pitch, choosing jig weight, the right rod, reel and braid, and the jerks that trigger strikes.
Vertical jigging is one of the most effective and exciting ways to catch big fish from a boat. You drop a metal jig straight down under the boat to the depth where fish are holding, then work it back up with rod and reel. Done well, it triggers savage strikes from amberjack, grouper, snapper, tuna and trevally. This guide explains the two main styles, speed jigging and slow pitch jigging, and covers jig weight, tackle, line, assist hooks and the techniques that catch fish.
What vertical jigging is
Instead of casting away from the boat, you fish directly below it. Electronics (a fish finder) show you where fish are holding, often on a reef, wreck, pinnacle or ledge. You drop the jig to the bottom or to the depth of the fish, then retrieve with jerks and pauses that make the jig dart, flutter and fall like an injured baitfish. Strikes often come on the fall.
Speed jigging vs slow pitch jigging
Speed jigging (high pitch)
- The action: fast, aggressive jerks and fast winding. The jig darts upward quickly.
- Jigs: long, slim jigs that cut through the water.
- Rods: short, stiff, fast action rods with strong backbone.
- Best for: aggressive, fast pelagic fish such as greater amberjack, yellowtail amberjack, tuna and giant trevally.
- Downside: physically demanding. Many anglers tire quickly.
Slow pitch jigging
- The action: short lifts of the rod (often a quarter or half turn of the handle) followed by a pause that lets the jig flutter and fall.
- Jigs: shorter, wider, often asymmetrical jigs designed to glide, spin and flutter on the fall.
- Rods: special slow pitch rods with a soft, parabolic action that loads and springs back, doing much of the work for you.
- Best for: bottom and near-bottom fish such as groupers, snappers, amberjack and spangled emperor, and for less aggressive fish in general.
- Advantage: less tiring, very effective, and you can fish deep water all day.
Choosing jig weight
The basic rule: use a jig heavy enough to reach the bottom and stay close to vertical. Current, drift speed, depth and line diameter all matter.
- A rough starting point is 1 gram per metre of depth in light current, using thin braid. For example, 150 to 200 g in 150 to 200 m of water.
- In strong current or fast drifts, go heavier.
- In shallow water with slow drift, you can go lighter, which often gets more strikes.
Thinner braid cuts through the water with less resistance and lets you fish lighter jigs, which is one reason jiggers use quality braid.
Tackle for vertical jigging
- Rod: usually 1.6 to 1.9 m (5 ft 3 in to 6 ft 3 in). Choose by jig weight rating. See rod power and action explained.
- Reel: a powerful spinning reel (size 6000 to 14000) for speed jigging, or a compact conventional or baitcasting reel for slow pitch, which gives better control of the fall. Read our baitcasting and conventional reels guide.
- Line: 30 to 80 lb braid, often multicolour so you can see the depth. Thin braid helps reach the bottom.
- Leader: 3 to 10 m of 40 to 130 lb fluorocarbon or nylon, depending on the fish and structure. See how to choose a fishing leader.
- Knot: the slim, strong FG knot to join braid to leader, and a solid ring or Palomar knot at the jig.
Assist hooks
Jigs are fished with assist hooks: short, strong hooks tied to braided cord and attached at the top of the jig (and sometimes at the bottom). Because the hooks hang free near the head, fish that attack the jig are hooked around the mouth and cannot use the heavy jig body as a lever to throw the hook. Use one or two assist hooks at the top for most fishing; adding a bottom hook can increase hookups but snags the bottom more. Learn about hook styles in types of fishing hooks.
How to jig: step by step
- Find fish. Use your fish finder to locate fish on structure, and position the boat to drift over them.
- Drop the jig. Free spool to the bottom with your thumb lightly on the spool (or line through your fingers on a spinning reel) to feel the jig land and to feel strikes on the drop.
- Engage the reel immediately when it touches the bottom so it does not snag.
- Work the jig. Speed jigging: one sharp jerk per turn of the handle, at a fast rhythm. Slow pitch: short lifts and pauses, letting the rod spring back and the jig flutter.
- Cover the zone. Work up through the depth where fish are showing on the screen, usually 10 to 30 metres above the bottom, then drop back down.
- Watch for strikes on the fall. If the line stops sinking or goes slack early, wind and lift.
Fighting fish on jigging tackle
Big fish near reefs will try to dive straight back into the structure. Use a firm drag and lift hard in the first seconds to turn the fish away from the bottom. Keep the rod butt under your arm or in a gimbal, pump with your legs, and wind on the way down. Our reel drag guide explains how firm to set it.
Conservation note
Many deep reef fish suffer from barotrauma when brought up from deep water. If you plan to release them, use a descending device to return them to depth quickly, and follow local rules on bag limits and seasons.
Identify your catch with ReelScan: snap one photo to get the species, size and safety notes, and earn points. Scan a fish.
Deep water, big surprises
You never know what will hit a jig 100 metres down. ReelScan identifies your catch from a camera photo, shows typical and maximum size, edibility and safety notes, and awards points up to 200 for a true trophy. Track every species you pull from the deep and compare your season with jiggers around the world.
Summary
Vertical jigging puts a metal jig straight under the boat where fish are holding. Speed jigging uses fast, aggressive jerks for pelagic fish; slow pitch uses soft rods and fluttering falls for bottom fish. Match jig weight to depth and current, use thin braid, a long fluorocarbon leader joined with an FG knot and sharp assist hooks, and turn big fish away from the reef quickly.