How to Use a Fish Finder: Reading Sonar, Bottom and Bait
Read a fish finder like a pro: arches, bait balls, hard vs soft bottom, frequencies, side and down imaging, and finding structure.
A fish finder (echo sounder) uses sonar to show the depth, the bottom, baitfish and fish below your boat or kayak. Learning to read it properly helps you find structure, bait and fish instead of guessing. This guide explains how a fish finder works and how to read what you see.
How a fish finder works
A transducer under the boat sends sound pulses down. When they hit the bottom, fish or bait, they bounce back. The fish finder measures how long the echoes take to return and draws them on the screen.
The main types of sonar
- Traditional 2D sonar (CHIRP): shows depth, bottom and fish arches directly under the boat. Most useful for depth and bait.
- Down imaging: shows a detailed, photo-like picture of what is directly below.
- Side imaging: shows structure to the left and right of the boat, useful for finding reefs and wrecks.
- Live (forward-facing) sonar: shows fish and lures in real time. Advanced and expensive.
Reading the screen
The bottom
- A thick, bright line means a hard bottom (rock, reef or shell).
- A thin, weaker line means a soft bottom (mud or sand).
- Irregular shapes and steps mean structure, rocks or wrecks.
Fish arches
A fish appears as an arch because the boat passes over it: the fish is farther away at the edges of the sonar cone and closest in the middle. Arches show more clearly when the boat is moving.
Baitfish schools
Clouds or clusters of small marks in mid-water usually mean bait. Predators often show as bigger arches around or below the bait.
Thermoclines and noise
A faint horizontal band at a fixed depth can be a thermocline (a temperature layer). Random dots and speckles near the surface can be noise or bubbles.
Important settings
- Sensitivity (gain): too low and you miss fish; too high and the screen fills with noise.
- Range: set auto, or slightly deeper than the actual depth.
- Frequency: higher frequencies give better detail in shallow water; lower frequencies reach deeper.
- Zoom and bottom lock: help you see fish close to the bottom.
Using a fish finder to catch fish
- Find structure: reefs, wrecks, drop-offs and pinnacles.
- Find bait: fish follow bait.
- Mark spots on GPS so you can return.
- Drift or anchor up-current of the marks. See the drift fishing guide.
- Drop jigs or bait to the depth where fish are showing. See the vertical jigging guide.
Fish finders for different fishing
- Bottom fishing: watch for hard bottom and fish close to the seabed. See the bottom fishing guide.
- Deep drop fishing: a powerful transducer is needed. See deep drop fishing.
- Kayaks: compact units with small transducers. See saltwater kayak fishing.
Learn your fish finder on water you already know. Seeing how a familiar reef or channel looks on the screen teaches you to recognise the same features on new water.
Identify your catch with ReelScan: snap one photo to get the species, size and safety notes, and earn points. Scan a fish.
Summary
A fish finder shows depth, bottom type, structure, bait and fish. Learn to read hard and soft bottom, fish arches and bait clouds, set sensitivity and range correctly, mark good spots on GPS, and fish the depth where fish are showing.