How to Choose a Jigging Reel: Spinning or Overhead, Drag and Gearing
Choosing a jigging reel: spinning vs overhead, power vs speed gearing, drag numbers, line capacity and features that matter for heavy jigging.
A jigging reel has to lift heavy metal jigs from deep water hundreds of times a day and then stop a powerful fish heading for the reef. A normal casting reel quickly wears out or runs out of power. This guide explains how to choose a jigging reel: spinning vs overhead, gearing for speed or power, drag, line capacity, and the features that matter most.
Spinning vs overhead jigging reels
Spinning jigging reels
- Pros: easy to use, can also cast to fish feeding on the surface, no backlash.
- Cons: less cranking power, more tiring for deep or slow jigging, the bail can be a weak point under heavy loads.
- Best for: speed jigging in moderate depths, mixed jigging and casting trips, beginners.
- Sizes: 6000 to 14000, depending on jig weight and fish size. See spinning reel sizes explained.
Overhead (conventional) jigging reels
- Pros: more cranking power, better line control, comfortable for long days, the standard for slow pitch.
- Cons: cannot really cast, take practice with thumb control when dropping the jig.
- Best for: slow pitch jigging, deep water, heavy fish.
- Features: compact low-profile bodies, star or lever drag, often a line counter.
Gearing: power or speed
- Power gear (around 5:1 to 6:1): easier to lift heavy jigs and fish; standard for slow pitch and deep water.
- High gear (6.2:1 and above): fast jig action and quick line pick-up for speed jigging and tuna.
- Two-speed reels: switch between fast and low gear; ideal for big fish. Read reel gear ratio explained.
Check line retrieved per handle turn rather than just the ratio, since spool size changes the real speed.
Drag that holds up
Jigging puts constant load on the drag. Look for:
- High maximum drag (10 to 25 kg), so the drag runs smoothly at normal settings of 25 to 33 percent of your line strength.
- Carbon drag washers that stay smooth when hot.
- Sealed drags that keep salt and water out; see sealed vs unsealed reels.
- Lever drag on overhead reels for precise strike and full settings; see lever drag vs star drag.
Read fishing reel drag explained to set it correctly.
Line capacity
For most jigging you need 300 m or more of PE braid:
- PE 1.5 to 2 (20 to 30 lb) for light jigging in 30 to 80 m.
- PE 2 to 3 (30 to 50 lb) for medium jigging and amberjack.
- PE 3 to 5 (50 to 80 lb) for heavy jigging, dogtooth tuna and big grouper.
Use colour-coded braid (one colour every 10 m) so you know exactly how deep your jig is and can drop to the same depth every time. Read choosing braided line for saltwater.
Other features worth having
- Line counter on overhead reels, useful for hitting the exact depth of the fish.
- Power handle knob (large T or round knob) for a better grip.
- Solid metal body that does not flex under load.
- Corrosion-resistant bearings and parts.
Matching the reel to the rod
Pair overhead reels with overhead jigging rods and spinning reels with spinning jigging rods. The reel should match the rod's PE rating and jig weight. See the jigging rod guide.
Caring for a jigging reel
- Rinse with fresh water after every trip, with the drag tightened slightly so water does not enter the washers.
- Loosen the drag fully for storage.
- Service the reel once a year, more if you fish often. See how to clean and maintain a fishing reel.
When jigging deep, drop the jig with your thumb lightly on the spool of an overhead reel. Uncontrolled spools create loops and tangles that can snap a line on the first bite.
Identify your catch with ReelScan: snap one photo to get the species, size and safety notes, and earn points. Scan a fish.
Quick guide
- Speed jigging, casting to surface fish, or beginner? Spinning, 6000 to 10000.
- Slow pitch or deep water? Compact overhead with power gear.
- Big fish? Two-speed overhead with lever drag.
- Always: 300 m+ of colour-coded braid and a sealed drag.
Pair your reel with the techniques in the vertical jigging guide and the slow pitch jigging technique.