Baitcasting and Conventional Reels: A Saltwater Angler’s Guide
Baitcasting and conventional reels explained: lever drag vs star drag, spool control, line capacity and when they beat a spinning reel.
When sea anglers need more power, more line and more control than a spinning reel can give, they turn to revolving spool reels: baitcasting reels for accurate casting inshore, and conventional reels for heavy bottom fishing, trolling and big game. This guide explains how they work, the difference between lever drag and star drag, and how to choose the right one for your fishing.
How a revolving spool works
On baitcasting and conventional reels the spool turns as line goes out and comes in, and the line runs straight off the spool through the rod guides with no twist. This gives three big advantages: more cranking power, better line control and no line twist. The trade-off is that when you cast, the spool can spin faster than the line leaves it, causing an overrun known as a backlash. Braking systems and your thumb prevent it.
Baitcasting reels
Baitcasting reels are compact, low-profile reels that sit on top of a casting rod.
Key features
- Braking system: magnetic or centrifugal brakes slow the spool during the cast. Start with high brake settings and reduce them as your thumb control improves.
- Spool tension knob: adjust it so your lure falls slowly when you release the spool.
- Level wind: a guide that moves across the spool to lay line evenly.
- Star drag: a star-shaped wheel next to the handle that adjusts drag.
Best uses: casting medium and heavy lures to structure for species such as snook, red drum, striped bass and mangrove snapper. Also popular for light jigging and slow pitch jigging. See the vertical jigging guide.
Conventional reels
Conventional reels are larger, round reels designed for power and capacity. Some are built for casting (with brakes and a small spool), but most are made for dropping baits and jigs straight down or trolling behind a boat.
Key features
- Large line capacity: hundreds of metres of line for fish that run long distances.
- High cranking power: large gears and low gear ratios lift heavy fish from deep water.
- Two-speed models: a high gear for fast retrieve and a low gear for winching a tired fish.
- Clicker (ratchet): a switch that makes a loud click when line goes out, useful when trolling or fishing with the reel in free spool.
Best uses: offshore trolling for tuna, wahoo, mahi-mahi and marlin; heavy bottom fishing for grouper and snapper; deep drop fishing.
Star drag vs lever drag
This is the biggest choice when buying a conventional reel.
Star drag
- Adjusted by turning a star wheel. Simple, reliable and cheaper.
- Free spool is controlled by a separate lever or button, so you must remember your drag setting when you put the reel in free spool.
- Excellent for bottom fishing, light trolling and anglers on a budget.
Lever drag
- Adjusted by a lever that moves through settings such as free, strike and full.
- You can set a precise strike drag and return to it every time, which matters when fighting large fish.
- Smoother over long runs because of larger drag surfaces.
- More expensive, but the standard for serious trolling and big game.
Whatever system you use, the drag must be set correctly. Read how to set your drag for the method.
Choosing reel size
Conventional reels are often sized by numbers or by a "class" based on line strength: 20 lb class, 30 lb class, 50 lb class, 80 lb class and so on. Match the reel class to the line you will use and the fish you expect.
- Inshore baitcaster: holds around 150 m of 20 to 30 lb braid.
- Light conventional (20 to 30 lb class): bottom fishing, light trolling, smaller tunas and kingfish such as king mackerel.
- Medium (50 lb class): bigger tunas, wahoo, large grouper and amberjack.
- Heavy (80 lb class and above): marlin and giant tuna.
Line for revolving reels
Revolving reels work with all line types. Braid gives capacity and feel for bottom fishing and jigging; monofilament is still widely used for trolling because its stretch cushions sudden strikes. Many anglers fill most of the spool with braid and top it with a long length of monofilament. Compare the options in braid vs monofilament vs fluorocarbon.
Matching the rod
Revolving reels go on casting or conventional rods with guides on top. Heavy conventional reels need a rod with a gimbal butt and often roller guides. Our comparison of spinning vs baitcasting vs conventional rods explains the differences.
Avoiding backlash on a baitcaster
- Set the brakes high at first.
- Adjust spool tension so your lure drops slowly.
- Keep your thumb lightly on the spool during the cast and press to stop it as the lure lands.
- Cast smoothly rather than hard. A side cast is easier to control than an overhead cast.
- Practise in an open space before fishing.
Fighting a fish on a conventional reel
Revolving reels reward good technique. Keep the rod tip up and the butt in a rod belt or gimbal, and use your legs and back rather than your arms. To gain line, lower the rod tip while winding, then lift smoothly without winding, a movement called pumping. Never wind while the drag is slipping: you gain no line, you waste energy and you heat the drag. On a two-speed reel, switch to low gear when the fish is deep and tired, then back to high gear when it swims toward the boat.
Maintenance
Revolving reels are easier to service than spinning reels because they have fewer moving parts in the rotor. After every trip, back off the drag, rinse with a gentle spray of fresh water and dry them. Oil the level wind and handle knobs regularly. Our reel maintenance guide covers the details.
Identify your catch with ReelScan: snap one photo to get the species, size and safety notes, and earn points. Scan a fish.
Big fish deserve a record
Conventional tackle brings up the biggest fish of your fishing life. With ReelScan, you can identify them on the spot, check size and safety notes, and log the catch with a photo. Bigger and rarer fish earn more points, up to 200 for a true trophy, so every tuna and grouper counts on the leaderboard.
Summary
Baitcasting reels give accuracy and control for casting lures inshore; conventional reels give the power, capacity and drag you need offshore. Choose star drag for simplicity and value, lever drag for precision with big fish, and match the reel class to your line and target species. Next, master the offshore trolling guide.