Shore Jigging: Casting Metal Jigs From the Beach and Rocks
Shore jigging explained: casting metal jigs for tuna, bonito, mackerel and trevally from shore, jig weights, retrieves and tackle.
Shore jigging means casting metal jigs from beaches, rocks, breakwaters and piers, then retrieving them fast or erratically to imitate fleeing baitfish. It reaches fish far from shore and catches fast pelagic species like mackerel, tuna, trevally, bluefish and queenfish. This guide covers tackle, jigs and retrieves.
Why shore jigging works
- Metal jigs cast very far, reaching deeper water and passing fish.
- They sink fast, so you can fish all depths.
- The flash and speed trigger reaction strikes from predators.
Tackle
Rod
A shore jigging rod is usually 2.7 to 3.3 m long, with a fast action and enough power to cast 30 to 100 g jigs. A longer rod casts farther and helps lift fish over rocks.
Reel
A 4000 to 8000 spinning reel with a high gear ratio for fast retrieves, and a sealed body for spray. See spinning reel sizes explained and reel gear ratio explained.
Line and leader
- Braid: PE 1.5 to 3, for long casts.
- Leader: 25 to 50 lb fluorocarbon, 1.5 to 3 m. Join with an FG knot.
Shore jigs
- Slim jigs: cast far and sink fast. Best for distance and fast fish.
- Wider jigs: flutter more on the fall.
- Weight: 20 to 40 g for light shore jigging, 40 to 100 g for heavy.
Use a single assist hook at the front, and optionally a treble or single at the back. See assist hooks for jigging.
Basic retrieves
- High-speed retrieve: cast, let the jig sink to the depth you want, then wind as fast as you can. Very effective for tuna and mackerel.
- Jerk and wind: sharp rod jerks with turns of the reel, making the jig dart.
- Lift and fall: lift the rod high and let the jig flutter down. Good for bottom species.
- Count down: count after the jig hits the water to fish different depths. Note the count when you get a bite.
Where and when to shore jig
- Rock ledges and points with deep water close by. Read rock fishing safety.
- Breakwaters and harbour mouths.
- Beaches with bait schools close in. See how to read a beach.
- Dawn and dusk are best.
- When birds are diving on bait.
Target species
Mackerel, Spanish mackerel, tuna, bonito, bluefish, trevally, queenfish, barracuda, seabass and amberjack.
Common mistakes
- Retrieving too slowly for fast pelagic fish.
- Not letting the jig sink to the depth where fish are.
- A weak or poorly tied leader knot that fails on long casts.
Cast at different angles and depths before moving on. Fish are often holding at one specific depth, and the count-down method helps you find it.
Identify your catch with ReelScan: snap one photo to get the species, size and safety notes, and earn points. Scan a fish.
Summary
Shore jigging uses long rods, high-speed spinning reels, thin braid and metal jigs to reach fish far from shore. Cast, count down to the right depth, and retrieve fast or with jerks. Fish rock ledges, breakwaters and beaches at dawn and dusk when bait is around.