Top Shots for Tuna: Mono and Fluoro Over Braid Backing
What a top shot is, why tuna anglers use one, how long it should be, the best connections and how it protects you from abrasion.
Ask any experienced tuna angler how their reel is loaded and they will often say "braid with a top shot". A top shot is a long section of mono or fluorocarbon placed on top of braid backing. It combines the capacity of braid with the stretch and abrasion resistance of mono. This guide explains what a top shot is, why it is used for tuna and other big pelagics, how long it should be and how to connect it.
What a top shot is
- Backing: most of the spool is filled with strong braid, often 65 to 130 lb, because braid is thin and gives huge capacity.
- Top shot: on top, 50 to 200 m of mono (or fluorocarbon), often 40 to 130 lb.
- Leader: a final leader of heavier fluorocarbon or mono to the hook or lure.
Why use a top shot
- Stretch absorbs shocks. Tuna make sudden bursts and violent head shakes near the boat. Mono's stretch acts like a shock absorber, preventing pulled hooks and break-offs.
- Abrasion resistance. Tuna often swim around the boat, under the hull and across the propeller. Mono survives rubbing much better than braid.
- Less visible than braid in clear water.
- Easier to handle at the boat when wiring the fish.
- Cheaper to replace. You replace the worn top shot instead of the whole spool.
How long should the top shot be
- Chunking and live baiting: 50 to 100 m, enough for the final stage of the fight.
- Trolling: 100 to 200 m, sometimes more, to absorb strikes from trolled lures.
- Popping and jigging: often no top shot; anglers use braid with a 2 to 10 m leader for casting and feel.
Choosing strengths
Match the top shot to the drag you will use:
- Yellowfin of 20 to 50 kg: 50 to 80 lb braid backing, 40 to 60 lb top shot, 60 to 100 lb leader.
- Yellowfin and bigeye of 50 to 100 kg: 80 to 130 lb braid, 80 to 100 lb top shot.
- Giant bluefin: 130 lb braid, 130 lb top shot on heavy lever drag reels.
See lever drag vs star drag and fishing reel drag explained.
Connecting the top shot
The connection must be strong and smooth enough to pass through rod guides:
- Braid to mono top shot: a wind-on loop-to-loop connection (hollow core braid spliced to the mono), or a strong knot like the FG knot or a double Bimini twist loop with an Albright.
- Top shot to leader: a double uni knot, an Albright knot, or a swivel.
Many offshore crews use loop-to-loop connections so they can swap top shots quickly between trips.
Capacity
Check that the reel holds enough backing plus the top shot. Remember a tuna can take hundreds of metres in its first run. Read line capacity and backing.
Maintaining the top shot
- Inspect the top shot after every fish for nicks and flat spots.
- Replace it after big fights, especially if the fish went under the boat.
- Store reels with loosened drag and out of the sun, since mono weakens with UV. See how often to change fishing line.
When the top shot is almost all back on the reel, the fish is close. That is the time to slow down, keep the rod low and let the stretch work for you.
Identify your catch with ReelScan: snap one photo to get the species, size and safety notes, and earn points. Scan a fish.
Summary
A top shot of mono over braid gives tuna anglers capacity, shock absorption and abrasion resistance in one setup. Choose 50 to 200 m depending on your method, match strengths to your drag, and connect with a smooth, strong joint. Combine it with the techniques in the offshore trolling guide and the live bait fishing guide.