Drift Fishing Guide: Covering Ground for More Fish
Drift fishing explained: setting up a drift, controlling speed with drift socks, rigs and baits, and finding fish on long drifts.
Drift fishing means letting the boat move with the wind and current while your baits or lures move naturally across the bottom or through the water. Instead of anchoring in one spot, you cover a lot of ground, finding scattered fish faster. This guide explains how to set up a drift, which rigs to use and how to control your drift.
Why drift fish
- You cover more ground and find fish faster.
- Baits move naturally with the current.
- No anchoring over sensitive reef or in deep water.
- Works for flatfish, snapper, bream, grouper and pelagic fish.
How to set up a drift
- Find the area: a reef, channel, sand patch or drop-off. Use your fish finder. See how to use a fish finder.
- Work out the drift direction: watch which way the boat moves with wind and current.
- Motor up-drift of the area.
- Turn the engine off and drop your lines.
- Drift across the area, then motor back up and repeat.
Mark productive drifts on GPS so you can repeat them exactly.
Controlling drift speed
- Too fast: baits lift off the bottom, and you need very heavy weights.
- Too slow: you cover little ground.
To slow the drift, use a drift sock (sea anchor), a parachute-like bag that drags behind the boat. To change the angle, set the boat side-on or use the engine gently.
Rigs for drift fishing
- Carolina rig: a sinker above a swivel, then a leader. Great for flatfish and snapper. See Carolina rig.
- Paternoster rig: hooks above the sinker, good over reef. See paternoster rig.
- Soft plastics on jig heads: bounced along the bottom. See soft plastic lures.
- Live baits: drifted near the bottom or mid-water. See the live bait fishing guide.
- Jigs: dropped and worked during the drift. See the vertical jigging guide.
Sinker weight
Use just enough weight to touch the bottom regularly. As the boat drifts, your line angle will increase. If you can no longer feel the bottom, add weight or let out more line. See the sinker types guide.
Technique
- Drop to the bottom, then lift slightly so the sinker taps the bottom now and then.
- Keep in contact with the bottom as depth changes.
- Feel for bites: a tap, a pull or extra weight.
- On a bite, let the fish take the bait briefly, then wind tight. With circle hooks, just wind.
Drift fishing for different species
- Flatfish (flounder, halibut): drift over sand and mud with baits or soft plastics close to the bottom.
- Snapper and bream: drift over reef edges and broken bottom.
- Pelagic fish: drift live baits or chunks in a chum line. See the chumming guide.
Safety
Always keep a lookout while drifting with the engine off, especially in shipping lanes and near other boats. Check that the drift will not take you onto rocks.
Note where each bite happens during the drift. Fish usually hold in one small part of the area, and shorter, targeted drifts over that spot catch more.
Identify your catch with ReelScan: snap one photo to get the species, size and safety notes, and earn points. Scan a fish.
Summary
Drift fishing lets the boat move with wind and current so your baits cover more ground. Start up-drift of structure, control speed with a drift sock, use just enough weight to touch the bottom, and repeat the drifts that produce bites.