Kite Fishing: How to Float Live Baits on the Surface
Kite fishing for sailfish and tuna: how fishing kites work, rigging clips and lines, bait placement and dealing with wind.
Kite fishing uses a fishing kite to hold live baits splashing on the surface, far from the boat. Predators such as sailfish, kingfish, tuna, dolphinfish and cobia see a struggling bait with no line or leader visible below it. It is one of the most effective ways to present live bait offshore. This guide explains how kite fishing works and how to set it up.
How a fishing kite works
A small, specially designed kite flies on its own line from a rod or electric reel. The fishing line runs through a release clip on the kite line. As the kite climbs and moves out, it lifts the fishing line out of the water, so only the bait and a short length of leader touch the surface. When a fish strikes, the fishing line pulls free from the clip and you fight the fish directly.
Advantages
- No visible line or leader in the water, so wary fish strike more readily.
- Baits stay on the surface, splashing and struggling, which attracts predators.
- Baits are spread far away from the boat and its noise.
- You can fish two or three baits from one kite at different distances.
Equipment
- Fishing kite: light, medium and heavy models for different wind strengths.
- Kite rod and reel, or an electric kite reel.
- Release clips on the kite line.
- Fishing rods with conventional or spinning reels, and 20 to 30 lb line.
- Live baits such as sardines, goggle-eyes, pilchards, blue runners or mullet. See how to catch live bait.
- Floats or markers on the fishing line to see where each bait is.
Setting up a kite spread
- Fly the kite out to the first release clip.
- Hook a live bait through the back near the dorsal fin, or through the nose.
- Clip the fishing line into the release clip and let more kite line out, so the bait moves away from the boat.
- Adjust the fishing line so the bait is just in the water, swimming at the surface.
- Repeat for the second and third clip.
Leaders and hooks
- Fluorocarbon leader for sailfish and tuna; short wire for kingfish and wahoo. See the wire leader guide.
- Circle hooks for sailfish, to hook them in the corner of the mouth. See circle hooks vs J hooks.
Wind and conditions
Kite fishing needs some wind, usually 8 to 25 km per hour. In no wind, some anglers use helium-assisted kites. In very strong wind, use a heavy kite.
When a fish strikes
- The bait will panic just before the strike. Get ready.
- When the line pulls from the clip, wind down tight without striking hard if using circle hooks.
- Clear the other kite baits if possible, to avoid tangles.
Target species
Sailfish, kingfish, tuna, dolphinfish, cobia, wahoo and sharks.
Watch the baits all the time. A nervous, jumping bait tells you a predator is close, and it gives you a few seconds to be ready.
Identify your catch with ReelScan: snap one photo to get the species, size and safety notes, and earn points. Scan a fish.
Summary
Kite fishing holds live baits on the surface far from the boat with no visible line. Use the right kite for the wind, clip your lines to release clips, and present baits just in the water. It is one of the best ways to catch sailfish and other surface predators.