Skills & gear › Hooks & tackle
Jig Heads Guide: Weight, Shape and Hook Size for Soft Plastics
How to choose jig heads for soft plastic lures: weight for depth and current, head shapes, hook size and strength for saltwater fish.
Soft plastic lures are only as good as the jig head that carries them. The jig head sets how deep the lure goes, how fast it sinks, how it swims and whether the hook holds a strong fish. This guide explains how to choose jig head weight, shape and hook size for saltwater soft plastics, from tiny harbour jigs to heavy deep-water heads.
What a jig head is
A jig head is a hook with a weight moulded around the eye. The soft plastic slides onto the hook shank, and the weight sits at the front, giving the lure its sink rate and action.
Choosing jig head weight
Weight depends on depth, current and wind:
- 1 to 5 g: harbours, shallow flats, light rock fishing. See the light rock fishing guide.
- 5 to 14 g: shallow inshore water (1 to 5 m), estuaries, mangroves, seatrout and bream.
- 14 to 28 g: deeper channels, piers and moderate current; seabass, snapper and flounder.
- 28 to 60 g: deep water and strong current from boats.
- 60 to 200 g: heavy deep-water jig heads for big soft plastics over reefs.
Rule of thumb: use the lightest weight that still reaches the depth you want and lets you feel the bottom. Lighter heads sink more slowly and naturally, which often gets more bites.
Head shapes
- Round head: the most common; versatile for swimming and hopping.
- Bullet or dart head: cuts through water and current, darts sideways when jerked.
- Fish head shape: realistic profile for swimbaits.
- Stand-up head: flat bottom that keeps the tail raised when resting on the seabed, ideal for bottom feeders.
- Weedless heads: with a hook point protected by the plastic for snags and weed.
Hook size and strength
- Match the hook to the length of the soft plastic: the hook point should exit about one third to halfway down the body.
- Saltwater-strength hooks are essential. Light freshwater heads bend open on snapper, trevally and kingfish.
- Common sizes: #6 to #1 for micro plastics, 1/0 to 3/0 for 7 to 12 cm lures, 4/0 to 8/0 for large swimbaits.
See the fishing hook sizes chart.
Rigging soft plastics straight
- Lay the plastic against the hook to see where the point should exit.
- Push the hook point into the centre of the nose.
- Thread the plastic up the shank, keeping it straight.
- Push the point out at the marked spot.
- Make sure the plastic sits straight and snug against the head. A crooked lure spins and twists line.
A drop of super glue on the collar keeps plastics in place when fish keep pulling them down.
Retrieves with jig heads
- Slow roll: steady winding just above the bottom.
- Hop and drop: lift the rod, then let the lure fall on a tight line; most bites come on the drop.
- Twitch: short sharp jerks for darting heads.
- Drift: let current carry the lure along the bottom.
Read soft plastic lures for saltwater and inshore lure fishing.
Colours and finishes
Painted heads with eyes look attractive, but unpainted lead or tungsten works just as well in most situations. Glow heads can help at night and in deep water.
Lead vs tungsten
Tungsten is denser than lead, so a tungsten head is smaller for the same weight, and it is non-toxic. It is more expensive. Some countries restrict lead in fishing tackle; check local rules.
Carry a small range of weights for every plastic size. When the bite stops, changing the jig head weight often changes everything.
Identify your catch with ReelScan: snap one photo to get the species, size and safety notes, and earn points. Scan a fish.
Summary
Choose the lightest jig head that reaches your target depth, match the head shape to the retrieve, use strong saltwater hooks sized to the plastic, and rig the lure straight. A box of well-chosen jig heads makes soft plastics one of the most effective lures in the sea.